anderten Posted October 9, 2017 Share Posted October 9, 2017 I've come to ask for help !! A week ago my car was down, after taking it to the mechanic it was found that there was water in the engine! so the dome gasket was gone, so it replaces the following parts: fuel pump, complete engine repair set, covers, segments and spark plugs. After so much expense with parts, the car does not pick up, the spark plugs come on but it still does not catch! The mechanic thinks that there may be enough with the current of the candles not enough and I'm in this situation! Any idea? We remove the spark plugs and check that the fuel is reaching the spark plugs. Any ideas? thank you Link to comment Share on other sites More sharing options...
Trevor Posted October 10, 2017 Share Posted October 10, 2017 I would start by looking at the battery condition, connections and earth connections to the chassis. After that, I would look at other obvious areas, such as ignition immobilisation and fuel inertia switch. Link to comment Share on other sites More sharing options...
anderten Posted October 10, 2017 Author Share Posted October 10, 2017 such as ignition immobilisation and fuel inertia switch? where do i can find that part? the energy comes to the spark plugs! The battery has a good charge, I even tested it with the multimeter. the car arrived at this point because the cupula gasket burned and water got into the engine! Link to comment Share on other sites More sharing options...
Recommended Posts