Jump to content

All Activity

This stream auto-updates

  1. Yesterday
  2. Thanks Steve for comment. Been told defo make sure you get a warranty with reconditioned engine. Just trying to find one at the moment.
  3. hi, welcome to the club I suggest getting a smart repair done on this as will only get worse over time. not too expensive.
  4. Hi mate, welcome to the club First thing you you need to do is check the chassis at the weak point between the cab and tub, there was a recall on these and you need to check you can get this sorted first. is the chassis got holes in it or just surface rust? if surface rust then you just need to cheam it all up and spay on dinitrol Then when that has set and hardened, get buzzweld Lanolin and spray the underside of the car a couple of times, You can spray lanolin every year, its really easy to do yourself. see the chassis snap here: https://practicalmotoring.com.au/car-news/nissan-d40-navara-caught-chassis-snap-drama/
  5. Sorry to hear this mate. Must be a nightmare for you. You will probably need to get it stripped and repaired or a recondition engine fitted. You need to make sure its a proper company that does the work so the engine is warranted. Dealer will be too expensive probably. Once repaired, you can hand the car back (you usually can do this half way through the finance term anyway) or pay the balloon and sell the car privately.
  6. Last week
  7. No oil light warning came on. Had to get AA. Low oil. Timing chain slipped & now engine has had it. Need reconditioned engine. Don't know what to do as car still on finance & in Nov got a balloon payment to cover or give it back currently can't give it back as not working. Any ideas.
  8. I own a 2008 d40 navara and there is a lot of corrosion on the chassis...I heard that nissan recall vehicles with this problem due to a shipping problem years ago where the chassis where damaged at sea. Is this something that can fixed through nissan? Thanks
  9. Does anyone know a company who can re-code a second hand Leaf head unit to the VIN of my Nissan Leaf (2014)? I had to replace the head unit with a like for like second hand one. My local Nissan dealer is not willing to attempt to re-code it as they said it may or may not work. I have contacted numerous audio / car tunning companies in the North West but they said I should contact Nissan. Cheers - Tom
  10. Have finally purchased sensor.but it does not come with fitting to connect to wiring. Cannot find a suitable connector ! Help
  11. Hey just introducing myself im Michael from Southampton i have traded my 2011 Qashqai ntec for a 2020 Qashqai tekna+. I am loving it but i am looking for a fuse cover for inside the glove box that isnt as expensive as they are on ebay if anyone can help?
  12. Hey, I have noticed what looks to be like an air bubble on the front bumper. does anyone know what this is? And what the fix is?
  13. Earlier
  14. Hi, looking for information on alloy wheels and tyres ( possibly low profile) that I could put on my nissan nv 200 van that would make it individual and stand out more Thanks Paul
  15. I’m looking for a Pathfinder for conversion into an ambulance for use in east Ukraine. It needs to be mechanically sound and structurally robust, so no MoT advisories for rust. I’m based in Birmingham, and the budget is £3-4000. If you have anything suitable please drop me an email Jerry.marsden@btinternet.com
  16. Thanks for the welcome message. As to the models, I have always found them a better value proposition than the other Japanese makes, and that goes double for European cars. I have had other makes (briefly). Rover SD1 V8, Humber Imperial, Holden Commodores (my wife has had a series of wagons, up to her current 14 model SV6 wagon), and even an Aston Martin DB6 Vantage (for a couple of years). Thanks again, Phil
  17. I have a rare ( very rare ) 200SX it’s not in good shape underneath . But I need to sell the car . It’s been in my family from new .
  18. I've had my 350Z for three years now. Wonderful car in every way. However, there's a problem with the cooling fans and I'd like to replace them. Nissan OEM parts are unbelievably over-priced. An OEM fan and motor assembly is priced around £915, Can anyone suggest an aftermarket parts supplier in UK and EU? Any help would be much appreciated.
  19. Thats not the code written at the bottom of the label (4683) ?
  20. Best method is to connect a multimeter to the battery and look for current draw If the current increases as you remove certain fuses then that is where the power is being consumed Would first check the earth leads as common old older Nissan models for these to break and the alternator may be drawing from the battery
  21. Hi....welcome to the Club Wow! you've had quite a few interesting Nissan models over the years, even going back to when they were Datsun ! So you're a British bike man....although strange you're not into Japanese bikes 🙂 I ride a Honda bike, mainly for the reliability, but is also great fun! Great to have you onboard!
  22. My car was suffering from the battery draining. Fitted a new battery, problem went away for 3 months but now battery draining again. No power to instrument panel at all. Put jump leads on and starts at 1st turn of the key
  23. Please help to get my radio code i replace batterry and radio not working CL052950164971seraip number PN-2424M model number thanks
  24. I have a 1985 Nissan Sunny B11 1.3. The radiator collar is perishing fast and one of the lugs that the raditor cap attaches to has snapped off. Anybody any idea where I can find a replacemnt radiator or know of another model that would fit without modifying?
  25. Hi anyone I have a 2012 D40 just have noticed the air con isn’t working I have had the gas renewed but it doesn’t give out any cold air so I’ve been told I need to replace the condenser ( is it possible to do this work without special equipment by myself) cheers jonnnie
  26. Hi all Ive got a Nissan Navara NP300 with a Roll & Lock Style Tonneau Cover fitted Does anyone know where and how the drain off pips need to be fitted I have drilled through the bulk head on one side but there is a gap of around 40mm between the bed liner and the bulk head and I have no idea how to get the rubber tube through I guess I may have regretably done something wrong, and would really appreciate any advice! See pics Thanks legepe
  27. I would like to replace the head unit on my Maxima, in particular to get a functioning integrated satnav. I could do with a recommendation based on experience from a J12 owner. By way of introduction, I am in my seventies and retired as a Postman. First Nissan (Datsun), was a 120Y Coupe (my wife's) on which she traded a 72 Torana. After that, 180B wagon, 200B Wagon, N10 Pulsar (first model 5 speed manual dealer rep {my neighbor} car, Skyline Exec, 260C 280C (one of those was a wagon ?) 2002 Maxima 320k J12 2012 Maxima (written off for me) J12 2012 Maxima replacement. I also had a Bluebird as a company car, part of a small fleet I bought for the company I worked for. Main interest in motoring is BSA/Triumph bikes.
  1. Load more activity
×
×
  • Create New...