Jump to content

beat900

Members
  • Posts

    1
  • Joined

  • Last visited

Profile Information

  • Location
    Merseyside
  • Nissan Model
    2011 Qashqai 1.6 N-TEC

beat900's Achievements

Newbie

Newbie (1/14)

  • First Post
  • Conversation Starter
  • Week One Done
  • One Month Later

Recent Badges

  1. Hi all, I am hoping someone can help me out incase I am doing something wrong. Last week the clutch on my 2011 Nissan Qashqai 1.6 Petrol appeared to have failed and I had the pedal stuck on the floor with no pressure at all. After spending the last few days looking into this, I thought it maybe the Master Cylinder at fault so I have replaced it. However I am still experiencing the same problems as before, so wanted to check I am bleeding the car correctly. I have connected a clear tube to the bleeder nipple on the Slave Cylinder and moved it to the bleed position. I have filled the reservoir with Dot 4 and have removed all air bubbles. I lock the pipe back off again when the clutch pedal is pressed to the floor, after roughly 15 pumps of the pedal with a 2 second wait in-between. Unfortautnely I still have no resistance on the clutch pedal, is there something I am missing here? Any pointers would be greatly appreciated as I want to exhaust everything before taking the car in for a new slave and probably clutch. Thanks in advance. Tony
×
×
  • Create New...