Jump to content

Recommended Posts

Hi guys thanks accepting me in ur club, my topic is just put in two rear sensors and abs light still on, put it to computer and it’s reading that left rear sensor still faulty, and ems module reading fault . Tested wires at abs left rear and the no power reading from it. Tried right hand right ands it got a reading. Any suggestions. Thanks 

Link to comment
Share on other sites


1 minute ago, Ruby said:

Hi guys thanks accepting me in ur club, my topic is just put in two rear sensors and abs light still on, put it to computer and it’s reading that left rear sensor still faulty, and emc module reading fault . Tested wires at abs left rear and the no power reading from it. Tried right hand right ands it got a reading. Any suggestions. Thanks 

Sorry Emc module

Link to comment
Share on other sites

Have a look at the reluctor (toothed) ring .....unless it has a Gen2 type wheel bearing type.

If the air gap is incorrect or toothed ring damaged/missing then no signal.

Also check the connections again to see if pins aligned or damaged

One other thing, worth checking resistance of sensors, maybe one is bad?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...