Hi all,

Hope everyone is doing well. 

I recently buy an nv300 with a blown engine from water intake. 3 bend con rods was the issue. 

After tearing the engine apart and sourcing the fixing parts I am currently stuck as ive tried a few places to get the torque settings for the head bolts for this engine but with no luck. I was hoping maybe someone might possess this info on an up to date auto data package... maybe..

Another thing is the timing set up and/or special tool kit for doing it..?

Any help on this would begreat.ly appreciate. 

Thanks

Update-

Torque settings are the exact same as the older 2.0l engine. (M9R780).

These 2.0l 120 (M9RV710) use the same timing kit also.

Hope this helps some poor soul out along the way.